*Current build time 3-4 days*
UK SHIPPING £20.00 - 24 HOUR COURIER
EU SHIPPING £55.00 - 2 TO 3 DAY SERVICE
ROW SHIPPING £65.00 - 2 TO 5 DAY SERVICE DEPENDING ON LOCATION
Building on the success of the award-winning Radius DJ mixers, the new MasterSounds flagship 4V range comprise premium 4 channel DJ mixers aimed at clubs and DJs requiring a conventional DJ toolkit with “no compromise” audio fidelity. Available in both rotary and linear fader options, the Radius 4V and Linear 4V encompass the pinnacle of audio excellence, equipped with the highest quality components.
There are 4 fully-featured channel strips with Aux send (switchable pre or post fader), input level trim, illuminated input select switch, a super smooth 3 band asymmetric equaliser, large illuminated Cue switch, high quality faders (TKD for the Linear 4V and Alps for the Radius 4V) and 10-point LED VU meter.
To the right of the channel strip features a 3-band Master EQ/Isolator, Master and Booth level controls, headphone monitor with split and Cue/add mix control.
Below the master section is a high-quality Penny & Giles crossfader, with contour control to adjust the curve from smooth mix to fast cut.
Two 36mm illuminated analogue VU meters provide accurate signal level monitoring of the mix buss, these automatically switch to monitoring the Cue level when a channel Cue is activated. If the signal level is excessive, the VU meter illumination will change from warm white to bright red.
At the heart of the 4V are four matched dual triode valves (tubes) which form part of the input buffer stage to the VCAs. The valve’s high input impedance minimises loading on the preceding stages but provides low output impedance to drive the VCAs, whilst the valve’s natural compression smooth and warm harsh transients. Careful circuit design around the valve minimises noise and distortion.
A new split composite/passive RIAA stage featuring Vishay 2% Polypropylene capacitors, close tolerance thin film resistors and JFET pre-amplifiers provide outstanding fidelity from the turntable inputs. All circuit coupling is through bypassed Panasonic electrolytics to preserve this fidelity throughout the entire signal chain.
The icing on the cake is a pair of Burson V6 Classic fully discrete operational amplifiers, providing world class summing for the fully balanced main mix buss.
*Please note - orders outside the EU do not have VAT applied, but will be subject to local import taxes on delivery*
Dimensions 350W x 282D x 84H
460W X 360D 180H
Packed weight 6.3KG
External Power Supply Universal 90V – 265V AC 50/60Hz 18
18-19V 50W Max
DC Internal Power Rails +/- 18V DC
Residual Output Noise <-97dBu 20Hz to 20kHz un-weighted
Mix noise Unity Line IN to Mix Out <-89bBu 20Hz to 20kHz un-weighted
Distortion THD+N <0.01% Line IN to Mix OUT 0dBu
Dynamic Range >116dB
Maximum Signal Level ±27dBu
Frequency Response 10Hz – 50kHz +0/-1dB
10Hz – 80kHz +0/-3dB
Headphone Output Power 800mW RMS into 32 Ohms
Channel EQ 3 Band -20/+6dB
Channel EQ Frequency 100Hz, 1kHz, 5kHz
Master EQ/Isolator Cut/Boost OFF to +12dB
Master EQ/Isolator Crossover Fc 350Hz and 3.5kHz
RIAA Accuracy Within 0.25dB 40Hz – 20kHz.
MasterSounds reserves the right to change the specification without notice.