FX Silver


FX Silver

Regular price £495.00 Sale

**Build Time Approximately 7-10 Working Days**





**Please note - FX has unique integration for MasterSounds DJ Mixers with the INSERT option. FX can be made to work with Xone 92 and Model 1, plus Xone 96 and any DJ mixer with send/return PLUS master insert (using a pair of splitter leads), if you are unsure if the unit will work with your Radius mixer, please ask.**

The MasterSounds FX unit is designed to perfectly integrate with the entire MasterSounds DJ mixer catalogue, maximising the use of both the Aux send system and mix insert feature in a way no other FX unit can. 

FX offers three products in one box - an analogue emulating FX section with analogue output, an analogue filter unit, and an analogue distortion system.

Analogue emulation provides 8 high quality FX, 3 delays, 3 reverbs, a subtle noise effect, and a pitching delay.

The FX are designed to blend into the mix rather than dominate the music, though there is considerable scope for adjustment of various effect parameters (delay regen, filter frequency etc) using the additional controls provided. The interface is pure MasterSounds, with effect selection on a rotary control (though there is a 3-bit binary LED counter), giving the unit a classic feel.

Below the FX section is an analogue filter, offering 3 filter types (high-pass, low-pass and band-pass) along with controls to adjust the cut-off frequency and resonance.

As the Filter section uses the insert function found on MasterSounds mixers, the entire mix is routed through it, expanding the feature set of each mixer. When the Filters are switched off the output from the FX processor is still fed through the low-pass section, providing additional scope for effect manipulation. The high-pass and low-pass filters are each activated by pressing the large illuminated switches and selecting both switches the filter to band-pass. Zero crossing detection circuits help to minimise filter clicks during activation.

Finally, the stereo distortion circuit is a sophisticated DC controlled, analogue asymmetric signal clipper, operated by a single rotary control. Additional circuitry monitors the level of the pre and post clipped signal, automatically applying make-up gain when needed, indicated by the side-chain LED. The distortion control adjusts the level from off (fully CCW) to subtle warmth (mid way) to hard clip (fully CW), but because the clipping is asymmetric it retains some warmth and character.

Both Aux In and Insert connections are on ¼” TRS jacks, with the Aux In being fully balanced. Two pairs of high quality balanced Neutrik leads are supplied with the unit, as well as a universal power supply, enabling plug and play use anywhere in the world.

*Please note - orders outside the EU do not have VAT applied, but will be subject to local import taxes on delivery*




Power Requirement

External Power Supply - Universal 90V – 265V AC 50/60Hz 12V 5W MAX

DC Internal Power Rails - +/- 18V DC


Audio Performance

Noise - <-95dBu 20Hz to 20kHz un-weighted

Distortion THD+N - 0.003% Insert IN to Insert OUT 0dBu

Maximum Signal Level - ±21dBu

Frequency Response - 10Hz – 50kHz +0/-1dB

Filter Range - 20Hz to 20kHz



(mm) W = 80 L = 190 H = 85

Weight = 0.8KG


(in) W = 3.5 L = 7.5 H = 3.5

Weight = 1.8lb


MasterSounds reserves the right to change the specification without notice.